Wilders Trailing Stop indicator

[sonychen59]

I don't have any difference between these two indicators.
They both show the same values

The attached picture shows the two indicators, one is always above the K bar and another works fine.

How about add two buffers for the "Wilders Trailing Stop MTF" indicator to
return 1 for Buy and -1 for Sell?

I appreciate your help.

[Apprentice]

Your request is added to the development list.
Development reference 2435.

[Apprentice]

Wilders_Trailing_Stop_MTF_signals.mq4

(3.58 KiB) Downloaded 292 times

Try this version.

[sonychen59]

Wilders_Trailing_Stop_MTF_signals.mq4

Try this version.

Thank you Sir.

I've tested and recorded the returned values.

I found that the "1 for Up and -1 for Down" cannot specify the buy/sell entry exactly.

I tested the indicator in 1 minute timeframe.
the settings are as below:
Length = 13;// => seems to be not necessary
Coeff = 0;
TimeFrame = 0;

Would you check the two buffers (up_signal/down_signal)to get exact values?
or what's the logic of the two buffers?

Very thank your help!

[Apprentice]

Your request is added to the development list.
Development reference 2469.

[Apprentice]

I don't understand what needs to be done. It works

[sonychen59]

image.png

I don't understand what needs to be done. It works

Dear Sir,

Yes, the indicator did return 1 or -1, but it is randomly.
(It almost returns 1. )

According to the following settings in 1 minute timeframe (just for test quickly):
Length = 13;
Coeff = 0;
TimeFrame = 0;

When the indicator returns 1, it means BUY,
returns -1, it means SELL.
It should be as the attached picture shown:

[sonychen59]

image.png

I don't understand what needs to be done. It works

Dear Sir,

I'd written a message several days ago.
I don't know why the fxcodebase usually ignored to confirm or skip my messages.
So, I send the messages again:

The indicator returns 1 for BUY and -1 for SELL indeed,
but not always.

It always returns 1 and sometimes returns -1.

If the signals are correct, it should be as the picture:


Thank your help.

[Apprentice]

Your request is added to the development list.
Development reference 2491.

[Apprentice]

I don't have any issues. It returns 1/-1 on every color change